HPU 1 St 0.75 gal 1.6 HP 1.3 gpm 12VDC MPN:253109

Double-acting DC hydraulic power units (HPUs) come with the control valve necessary for operating double-acting cylinders to provide power in two directions (usually up and down). A double-acting HPU and cylinder system allows precise control of upward and downward movement when raising and lowering platforms. By contrast, a single-acting system provides power in one direction only, such as raising a lift and relying on gravity to return the lift to the ground.

DC hydraulic power units (HPUs) are battery-operated and used to power tail-gate lifts, agricultural and marine equipment, dump trailers, and other portable hydraulic tools. They are smaller and more compact than AC power units and can be installed in hard-to-reach areas. DC hydraulic power units can be operated where access to a reliable electrical power source is limited or unavailable. They provide higher amounts of force than traditional electrical and mechanical systems, allowing hydraulic power units to lift and move heavier loads in a smaller footprint. DC hydraulic power units also provide precise movement and speed control over a wide range of speeds and load weights.

Technical Specifications

• Frame Design - Hydraulic Power Units Frame Mount
• Item Hydraulic Power Unit
• Circuit Design Double Acting
• Power Source - Power Units DC Power
• HP 1.6 hp
• RPM 2,600 RPM
• Voltage 12V DC
• Full Load Amps 325
• Pump Stage and Type 1 Stage Gear
• Pump Displacement 2.1 cu- in/rev
• Max. Pressure 2,500 psi
• Nominal Flow 1.3 gpm
• Flow @ 500 psi 2.5 gpm
• Flow @ 1000 psi 1.3 gpm
• Flow @ 1500 psi 1.3 gpm
• Flow @ 2000 PSI 1.3 gpm
• Flow @ 2500 psi 1.3 gpm
• Flow @ 3000 psi 1.3 gpm
• Duty Cycle Intermittent
• Reservoir Capacity 0.75 gal
• Overall Length 20 1/2 in
• Overall Width 9 in
• Overall Height 7 1/2 in
• Mounting Orientation - Power Units Horizontal
• Pressure Port Thread Size 1/4 in NPT
• Return Port Thread Size 1/4 in NPT
• Control Valve Configuration 4-Way/3-Position
• Control Valve Type Manual
• Tank Material Steel
• Cord Length 10 ft
• Built-In Features Check Valve

Manufacturer Details

• Manufacturer: Maxim
• Condensed Mfg Number: 253109
• MPN: 253109

Label Details

• Hazardous Material: N
• Green Material Flag: N
• Country of Origin: CN
• CA Prop 65 Wht Label: N

Classification Details

• Harmonization Code: 8477906500
• GDS Category Name: Electric Hydraulic Power Units
• GDS Family Name: Hydraulic Power Units and Accessories
• GDS Segment Name: Hydraulics
• UNSPSC: 39121004
• UNSPSC Class ID: 10
• UNSPSC Commodity Name: Power conditioning equipment
• UNSPSC Commodity ID: 04
• UNSPSC Commodity Name: Power supply units
• UNSPSC Family ID: 12
• UNSPSC Family Name: Electrical equipment and components and supplies
• UNSPSC Segment ID: 39
• UNSPSC Segment Name: Electrical Systems and Lighting and Components and Accessories and Supplies

Shipping Details

• Not For Sale In: HI AK PR