Tape Primer 94 Light Yellow 1 Quart Can MPN:7000001584

This item is NOT returnable.

3m™ tape primer 94 can be used to improve the overall adhesion of tape film and vinyl graphics to polyethylene polypropylene abs pet/pbt blends concrete wood glass metal and painted metal surfaces. Dries in minutes for efficient use make sure your surface is clean and dry before applying a thin uniform coat of 3m™ tape primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely which is usually accomplished in 5 minutes at room temperature before applying tape. Special note porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat. Recommended applications ul style"margin-top0px; padding-top 5px; padding-bottom 5px;" promote adhesion of 3m™ vhb™ tape for use on many plastic rubber painted and bare metal substrates application tips 3m™ tape primer 94 may be applied with a brush swab pressurized flow gun knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required. Features ul style"margin-top0px; padding-top 5px; padding-bottom 5px;" promotes adhesion to polyethylene polypropylene abs pet/pbt blends and other on difficult to stick to substrates commonly used for increasing adhesion of film and vinyl graphics in automotive detailing can be applied with brush or swab for small areas and a pressurized flow gun for larger areas cleans up with isopropyl alcohol

Additional Information

Additional Information