WaterBug® WB200 Unsupervised Water Detection System Hardwire Powered WB200

The waterbug® 200 is a water detection device idea for computer rooms document storage areas warehouses sump pumps and basements. Waterbug® sensors activate the alarm when a conductive bridge is formed between two contacts. Protect your assets with the wb200. Features ul style"margin-top0px;padding-top 5px; padding-bottom 5px;" monitors for the presence of water. Can be used to detect the absence of water. Device includes one standard unsupervised surface sensor (w-s-u - global#b508520) devise accepts a total of 6 sensors (w-s-u - global#b508520 & w-uc-u - global#b508518) 1 to 2 sensors can be located up to 200' (60.96m) or 3 to 6 sensors can be located up to 100' (30.48m) away from the device for a wide area of protection. Use 18-22 awg twisted pair wire for extension of sensors from the device hard wire powered device. Ensure that the power running to the device does not have a connection to earth ground. This could result in a failure to detect water or ground fault. Power requirements of 8 to 28vdc at 35ma or 12 to 28 vac at 100ma unit operating range of 32 to 130 f (0 to 54 c) in non-condensing environment. Indoor use only. Output is 1 form c (n.O./n.C.) with 30vdc at 1 amp resistive /24vac at 1 amp resistive

Additional Information