IEC Magnetic Contactor, 1NC/1NO, 100V-250V AC/DC, 3 P, Non-Reversing, Spring Type MPN:LC1G225KUEN

• The Schneider Electric IEC Magnetic Contactor is a 3-pole, non-reversing, coil-driven switching device rated for operation within IEC standards and specifications. It operates with a coil voltage of 100–250 V AC/DC and uses spring-type terminations in a surface-mount package. The unit includes auxiliary contacts (1NC/1NO) and supports TeSys-series IEC control with IP20 protection. It is rated for use with three-phase loads within specified voltage ranges

• horsepower ratings are based on standard testing conditions, and full-load currents of 225 A (inductive) and 290 A (resistive). The device is designed to operate at 50/60 Hz
• designed to operate within the specified temperature range
• actual performance may vary depending on environmental conditions, and is tested for a mechanical lifespan under specific test conditions
• actual durability may vary with usage.

  - Poles: 3

• Phase: Three
• Reversing: Non-Reversing
• - Coil Voltage: 100–250 V AC/DC
• Frequency: 50/60 Hz
• - Auxiliary Contacts: 1NC/1NO
• Includes Auxiliary Contacts: Yes
• Number of Auxiliary Contacts: 3
• Auxiliary Contact Module Capacity: 4
• - Main Contacts (Normally Open): 1
• - Full Load Amps: Inductive 225 A
• Resistive 290 A
• - HP @ Three Phase: 208V 60 hp
• 240V 75 hp
• 480V 150 hp
• 600V 150 hp
• - IP Rating: IP20
• Maximum Voltage Rating: 250V AC/DC
• - Dimensions: Depth 7.6 in
• Height 7.6 in
• Width 4.25 in
• - Mounting: Surface
• Termination: Spring Type
• - Series: TeSys
• Standards: CSA C22.2 No 60947-4-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, JIS C8201-4-1, JIS C8201-5-1, UL 60947-4-1
• - Enclosure: No Enclosure

Additional Information