Solenoid Valve, 2-Way, 2-Position, Normally Closed, 3/4 in Pipe Size, 120V AC, Inline Pilot, EPDM MPN:PS075EPW11-120/60-PP

• The PLAST-O-MATIC PS075EPW11-120/60-PP is a 2-way, 2-position normally closed solenoid valve rated for operation with liquids compatible with polypropylene body materials and EPDM seals. Operation within the specified maximum fluid temperature (180°F) and maximum differential pressure (70 psi)

• NEMA 4X enclosure supports indoor/outdoor use. It features a diaphragm valve design with an inline pilot type operation and uses a pilot operated mechanism for actuation. The valve body is made of polypropylene and can be installed in either a horizontal or vertical orientation. The valve operates at 120V AC and 60 Hz, includes the coil and seal, and is suitable for both indoor and outdoor environments.

  Key Features:

  • - Valve Type: Inline Pilot, Diaphragm
  • - Valve Ways/Positions: 2-Way, 2-Position
  • - Starting Configuration: Normally Closed
  • - Body Material: Polypropylene
  • - Seal Material: EPDM
  • - Operating Voltage: 120V AC at 60 Hz
  • - Wattage: 11 W
  • - Electrical Connections: 1/2 in Conduit
  • - Coil Enclosure: Watertight, Dust Tight
  • - Coil Insulation Class: F
  • - Maximum Ambient Temperature: 104°F
  • - Maximum Fluid Temperature: 180°F
  • - Maximum differential pressure: 70 psi (rating applies to water
  • other fluids not specified)
  • - Flow Coefficient (Cv): 7.6
  • - Nominal Pipe Size: 3/4 in NPT (inlet and outlet)
  • - Mounting Orientation: Horizontal or Vertical
  • - Dimensions: 7-9/32 in height, 4 in length, 4 in width
  • - Environmental Rating: Indoor, Outdoor
  • - Standards: CSA Certified
  • - Includes: Coil and seal components

Additional Information