GoVets™ Pallet Rack Upright Frame 24"D x 120"H 615290

✓ 14-gauge steel uprights ✓27600 lb. Total rated capacity ✓ teardrop connection style the GoVets™ pallet rack upright frame is an upstanding solution that supports pallet rack beams. This welded upright frame is made with 14 gauge steel and a long lasting baked-on enamel finish. When selecting an upright beam it is recommended to determine the total weight of all pallets for each pair of upright frames. (add the height of all pallet loads beam height allowing 4" to 8" clearance between the top of the load and the bottom of the beam above. The top beam should be a minimum of 6" less than the maximum height of your forklift reach. Frame depth is determined by the length of the pallet. The pallet should overhang the frame by 3" front and back. Interchangeable with interlake wireway/husky unarco steel king usp speed rack and invincible.) 27600 lb rated capacity higher than other pallet racking in the market. Capacity based on 36" beam shelf spacing. If seismic conditions apply verification of capacities must be confirmed with a seismic engineer. Global industrial™ is not responsible for engineering installation and/or application of this material. Global industrial™ is not responsible for permits. It is the full responsibility of the customer to check the contents and quantities. The (lbs) capacity rating(s) provided are for reference only. These ratings apply to static (non-seismic) conditions only.

Additional Information