METALpro 3/8" x 3/4" Oblong Punch & Die Set MP8104
METALpro 3/8" x 3/4" Oblong Punch & Die Set
This item is NOT returnable.
These oblong punch and die sets are designed for metalpro ironworkers. Each set comes with one upper punch and one lower die. The hole size is based on the upper punch. All sets come with our standard 2" lower die and 1/32" clearance from punch to the die. The hole size is based on the upper punch. Hole punch size must be equal to or greater than material thickness for best results. Rated for use in mild steel note we recommend the punch and die set that you are using is 1/32" larger than your bolt size (ex. 5/16" bolt would need 11/32" oblong punch and die set)Additional Information
- UNSPSC: 27112800
- Brand: METALPRO CORPORATION
- Package Quantity: 1
- Country of Origin: US
- FOB Origin: MI
- Ships by: PARCEL
- Comes in a kit: No
- Newly added to catalog: No
- Item is on Clearance: No
- Contains Hazardous Materials: No
- CA Proposition 65 Applies: No
- Package Length: 9.00
- Package Width: 4.00
- Package Height: 2.00
- Package Weight: 2.00
Product info last updated on April 25, 2026 1:51am UTC
Category: Punches and Dies