Laguna REVO 1836 Belt Drive Lathe 1-1/2 HP 110V Prewired MLAREVO 1836-110-150

The first feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the dro along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe. The bed is made from steel allowing the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength. Electronic variable speed is obtained via a vfd that converts 1 phase input to 3 phase output so even at low settings you will get an incredible amount of torque. The dro gives you an accurate rpm readout whenever any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle. The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection. Features ul style"margin-top0px; padding-top 5px; padding-bottom 5px;" electrical 1.5hp 110 volt 60 hz motor induction 1725 rpm tefc vfd delta s1 variable frequency drive poly-groove drive belt with ez access recommended breaker 15 amp spring loaded spindle lock maximum outboard swing 32" (w/ optional 20" extension kit installed) swing over banjo 13-1/2" steel bed astm a36 toolrest post size 1" bed gap 50mm spindle taper mt#2 swing over bed 18" rpm high 135-3500 rpm low 50-1300 tailstock quill #2 mt floor to spindle center 41-1/2" with pads accepts vacuum chuck yes front bearing tpi taiwan 6207llu rear bearing tpi taiwan 6205llu spindle index # 14/36/48 with lock distance between centers 36" headstock through-bore 3/8" headstock travel full length tailstock through-bore 3/8" tailstock storage of centers spindle size 1-" x 8 tpi rh live center threads 3/4" 10 unc floor to bed 32-" with pads floor space (w x l x h) 60" x 26" x 47"

Additional Information