Kukko Narrow 2-Arm Revers Quick Adj Set 5 Ton Capacity 4-3/4"(120mm) Open 9-7/8"(250mm) Reach 20-10+SP

This item is NOT returnable.

For removing bearings gears discs etc. For tight or difficult-to-access spaces. Ul style"margin-top0px; padding-top 5px; padding-bottom 5px;" the thin pulling hooks are suitable for narrow difficult-to-access locations. A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench. Can be installed on various pulling hooks and variable reach thanks to jaw extensions. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Cross-beam with hexagonal profile for good grip. Almost all components available as replacement parts time-saving order process thanks to numbering system. Note pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported. Stability support from optional series 219 clamp. Thin pulling jaws in various lengths with quick-adjusting capability. Parallel pulling hooks in every position even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip). Mechanical pressure screw. Milled thread treated with special coating. Two-arm design for space-saving operation. Series 20+ ul style"margin-top0px; padding-top 5px; padding-bottom 5px;" spread used internal 2 3/4 - 7 1/8" maximum load (metric) 2 5t hexagon drive (male) (metric) 17mm spread used internal (metric) 70 - 180mm depth (metric) 100/200/250mm spread (metric) 120mm

Additional Information