Watertight Pin & Sleeve Connector, 60 A, 600V AC/250V DC, Single Phase, 2 Pole, Style 1 Grounding MPN:HBL360CS1W

• The HUBBELL Watertight Pin & Sleeve Connector is a 60A, 600VAC industrial wiring device rated for use in industrial environments. It features a composite construction with a Valox 357 thermoplastic housing and an epoxy-painted aluminum shroud, constructed with materials that provide resistance to moisture and impact. The connector is NEMA 4X, IP68/IP69K enclosure ratings and includes design elements such as neoprene sealing glands and a spring-loaded, gasketed cover to help protect against dust and water ingress.

  
  
  

  Key Features of the HUBBELL Watertight Pin & Sleeve Connector:
  
  

  
  
  • Current/Voltage Rating: Rated for 60A at up to 600V AC or 250V DC single-phase operation
  
  
  • Body Material: Constructed from Valox 357 thermoplastic housing with an epoxy-painted aluminum shroud
  
  
  • Cable Compatibility: Accepts conductor sizes from #6 AWG to #4 AWG
  • suitable for cable diameters between 0.5 in and 1.45 in
  
  
  • Wire Connection Type: Uses pressure terminal screws for secure connectivity
  
  
  • NEMA Enclosure Rating: NEMA Type 4X enclosure rating provides protection against water, corrosion, and dust
  
  
  • IP Rating: IP68/IP69K rating for high-level moisture resistance
  
  
  • Temperature Range: Operating temperature range: -40°C (without impact) to +75°C
  
  
  • Grounding Style: Style 1 grounding with three-wire configuration (2 poles plus ground)
  
  
  • Performance Certifications: CSA Certified C22.2 No.182.1
  • UL Listed per UL Standard 1682
  • meets flammability rating UL94 V-0
  
  
  • Additional Features: Spring-loaded cap designed to cover connector opening when not in use
  • pin chamber located within the interior of the device
  • permanently fastened identification markings on device housing

Additional Information