Black HDPE Sheet Stock 12" L x 12" W x 0.125" Thick MPN:1ZAU6

• The ZORO SELECT - 1ZAU6 is a Sheet Stock plastic sheet, intended for use in a variety of industrial applications. This black HDPE (High-Density Polyethylene) material has been tested to resist corrosion, which may be beneficial for projects that require chemical resistance. With its standard grade classification, this sheet stock may be cut, shaped or molded to fit the needs of your project within its physical capabilities.

  
  

  • Corrosion and Chemical Resistance: The plastic sheet has shown some level of resistance against certain corrosive substances and chemicals during testing.
  • Friction Coefficient & Rating: It has a measured friction coefficient of 0.2 suggesting potential low frictional resistance
  • this could affect its performance where movement control is necessary.
  • Impact Strength & Rating: The impact strength stands at 1.30 ft-lb/in but has a poor rating indicating that it may not withstand high force or shock without breaking.
  • Machinability: Rated as fair, this indicates that the plastic sheet can be reasonably cut or shaped using industrial tools without causing significant damage to either the material or equipment.
  • Temperature Range: The product's specified operating temperature range lies between -58 Degrees F to 176 Degrees F
  • it's expected to function within these limits but actual performance may vary based on conditions.
  • Tensile Strength & Rating: Tensile strength was measured at approximately 4,600 psi during testing
  • however actual resilience under tensile stress may vary based on usage conditions.
  • Nominal Size & Tolerance: The nominal size of the plastic sheet is 12 in W x 12 in L with length tolerance +/-0.250 in and thickness tolerance +/-10% allowing slight variations from specified measurements

Additional Information