Clear PETG Sheet Stock 24" L x 24" W x 0.125" Thick MPN:1UTP8

• The ZORO SELECT - 1UTP8 is a Sheet Stock plastic sheet, made from PETG material. This clear and transparent plastic sheet comes in a standard grade with dimensions of 24" width and length. It is a versatile material that can be used in various industrial applications where fabrication of parts or prototypes may be needed.

  
  

  • Corrosion and Chemical Resistance: The sheet has properties that may provide some resistance to corrosive substances, chemicals, and certain environmental conditions.
  • Friction Rating: This plastic sheet has a slippery friction rating which could affect its use in applications requiring movement control and stability.
  • Impact Strength: Its impact strength is measured at 1.7 ft-lb/in
  • however it is rated lower on the scale for withstanding high forces or shocks over short periods without breaking.
  • Machinability: Its machinability rating suggests potential ease when cutting, shaping, or finishing using appropriate industrial tools
  • though care should always be taken not to cause damage to either the material itself nor the equipment being used.
  • Temperature Range: The specified operating temperature range lies between -40 Degrees F and 153 Degrees F. The product's performance characteristics might vary outside these limits.
  • Tensile Strength: The tensile strength is rated at 7,700 psi (pounds per square inch), indicating the potential stress this material might withstand before breaking when subjected to stretching or pulling forces.

Additional Information