Black HDPE Sheet Stock 24" L x 12" W x 0.500" Thick MPN:1ZAW4

• The ZORO SELECT - 1ZAW4 is a Sheet Stock plastic sheet, intended for use in a variety of industrial applications. Made from HDPE material, this black-colored sheet can be cut, shaped or molded into different forms depending on the specific requirements of your project. It has been tested to show resistance against certain corrosive substances and chemicals. Please refer to the product specifications for more details.

  
  

  • Corrosion and Chemical Resistance: This plastic sheet shows some level of resistance when exposed to certain corrosive substances and chemicals based on conducted tests.
  • Friction Coefficient & Rating: With a measured friction coefficient of 0.2, this sheet may exhibit lower levels of friction under specific conditions.
  • Impact Strength & Rating: The impact strength is measured at 1.30 ft-lb/in
  • please refer to the product specifications before subjecting it to forces beyond these parameters.
  • Machinability: Its machinability rating suggests that it might be cut or shaped using appropriate tools according to manufacturer guidelines.
  • Temperature Range: Tested within temperature ranges from -58 Degrees F up tp 176 Degrees F
  • performance outside these ranges has not been evaluated.
  • Tensile Strength & Rating: Measured tensile strength is approximately 4600 psi
  • always consider safety margins in design application
  • Water Absorption & Rating: Water absorption tests indicate it absorbs approximately 0.01% of its weight under specific conditions
  • performance may vary with different conditions.

Additional Information