Off-White HDPE Sheet Stock 48" L x 24" W x 0.188" Thick MPN:1ZAR1

• The ZORO SELECT - 1ZAR1 is a Sheet Stock, a type of plastic sheet that comes in various sizes and thicknesses. Made from HDPE material, this off-white plastic sheet is recognized for its potential adaptability and long-lasting properties. It's commonly used by industry professionals for fabricating parts or prototypes as it can be cut, shaped, or molded into different forms depending on the specific requirements of the project.

  
  

  • Corrosion and Chemical Resistance: This plastic sheet is designed with the intention of resisting damage or degradation when exposed to certain corrosive substances, chemicals, or specific environmental conditions.
  • Friction Coefficient & Rating: With a measured friction coefficient of 0.2 and classified as potentially slippery, this sheet may exhibit lower resistance when in contact with other surfaces.
  • Impact Strength & Rating: The impact strength is recorded at 1.30 ft-lb/in
  • however it's rated poorly which could indicate lesser capacity for energy absorption prior to potential breakage under abrupt force.
  • Machinability: Rated as fair which means it can be cut, shaped, or finished using industrial tools without causing significant damage to either the material or equipment.
  • Temperature Range: Has been tested within temperature ranges between -58 Degrees F to 176 Degrees F while maintaining its structure.
  • Tensile Strength & Rating: Measured tensile strength stands at approximately 4,600 psi
  • however it's rated poorly which might suggest reduced resilience upon stretching prior to possible breakage
  • Water Absorption & Rating: Shows signs of significant water absorption resistance marked by an approximate weight increase of only about 0.01% after immersion in water over a specified duration

Additional Information