IEC Magnetic Contactor, 1NO, 240V AC, 3 P, Non-Reversing, Screw MPN:XTCE007B10B

• The Eaton XT IEC contactor is rated for operation within specified voltage ranges, with 3 poles, a 240 V AC coil, and an amperage rating of up to 7 A. It includes one normally open auxiliary contact.

  Specifications

• - Action: Non-Reversing
• - Poles: 3
• - Coil Voltage: 240 V AC
• - Amperage Rating: 7 A
• - Contact Configuration: 1 NO
• - Auxiliary Contacts: 1 NO
• - Frame Size / Series: Frame B / XT
• - Electrical Connection: Screw Terminals
• - Mounting Style: DIN Rail, Panel
• - Enclosure: This product is provided without an enclosure
• appropriate installation should be in accordance with applicable standards.
• - IP Rating: This device has an IP20 rating suitable for indoor use in controlled environments.
• - Maximum Voltage Rating: Rated for operation within the specified voltage range up to maximum of approximately 690 V AC.
• - Embedded Surge Suppressor: Yes
• - Mechanical Operating Durability: 10,000,000 cycles
• - Certifications/Standards: UL Listed
• CSA Certified
• IEC 60947
• EN 60947
• CE Marked
• RoHS
• - Frequency: 50/60 Hz
• - Full Load Amps: Inductive 7 A
• Resistive 22 A
• - Reversing Capability: Non-Reversing
• - Includes Auxiliary Contacts: Yes

  Notes

• - The presence of an embedded surge suppressor does not guarantee surge protection effectiveness
• verify proper application.
• - The durability figure indicates mechanical operating cycles and does not imply suitability or safety over time.
• - Certifications/Standards listed are recognized standards but do not constitute certification guarantees beyond compliance verification.
• - Frequency and performance may vary based on system conditions.
• - Full Load Amps indicate rated current under standard test conditions
• actual currents depend on application specifics.

Additional Information