Solenoid Valve, 2-Way, 2-Position, Normally Closed, 1/4 in Pipe Size, 120V AC, High Flow, Brass MPN:8262H208V

• The ASCO 8262H208V is a 2-way, 2-position direct-acting solenoid valve with a normally closed configuration. It controls the flow of air, inert gases, light oil, fuel oil, and water using an energized coil to open or close the flow path. The valve includes a brass body and a coil with Class F insulation, designed to operate within ambient temperatures from -13°F to 131°F and handle fluid temperatures up to 180°F. Environmental rating: Corrosive, Hazardous, Indoor, Outdoor.

  Key Features:

  • - Valve Design: 2-Way/2-Position with Normally Closed starting configuration
  • - Body Material: Brass construction
  • - Orifice Diameter: 7/32 in
  • - Maximum Operating Pressure Differential: 100 psi (Air/Inert Gas, Fuel Oil, Light Oil, Water)
  • - Electrical Voltage: 120V AC at 60 Hz frequency
  • - Wattage: 10.1 W power consumption
  • - Coil enclosure: IP66-rated
  • does not require a separate external junction box
  • - Coil Insulation Class: F
  • - Electrical Connections: 1/2 in conduit with 18 in leads
  • - Environmental rating: Corrosive, Hazardous, Indoor, Outdoor
  • - Seal Material: FKM
  • - Inlet and Outlet Connection Type: NPTF thread
  • - Mounting Orientation: Horizontal or Vertical
  • - Dimensions: Overall Height 3-1/8 in, Length 1-9/16 in, Width 1-15/16 in
  • - Response Time: 1 second
  • - Includes Coil and Seal
  • - IP Rating: 66
  • - Nominal Pipe Size: 1/4 in

Additional Information