Solenoid Valve, 2-Way, 2-Position, Normally Closed, 1/4 in Pipe Size, 120V AC, High Flow, Brass MPN:8262H020

• The ASCO 8262H020 is a 2-way, 2-position, normally closed solenoid valve with a direct acting operation type. It features a brass body and controls flow of air, inert gas, light oil, and water within the device's stated operating parameters. The valve includes the coil and seals needed for installation, and it can be mounted in either horizontal or vertical orientation. The device is rated for ambient temperatures ranging from 14°F to 140°F and fluid temperatures up to 180°F. Outdoor and indoor use

• IP66 rating
• CSA and UL listed
• brass body with Buna-N seals indicating compatibility with corrosive media.

  Key Features:

  • - Valve Design: 2-Way/2-Position
  • Valve Positions: 2-Position
  • Valve Starting Configuration: Normally Closed
  • - Body Material: Brass
  • Seal Material: NBR (Buna-N)
  • - Connections: Inlet and Outlet are NPTF thread type
  • Nominal Pipe Size: 1/4 in
  • Center Line Pipe Center Size: 2-1/4 in
  • - Operation Type: Direct Acting
  • Response Time: 1 sec
  • - Flow Coefficient (Cv): 0.21
  • Orifice Diameter: 3/32 in
  • - Operating Pressure Differential Maximums: 370 psi (Air/Inert Gas), 160 psi (Light Oil), 330 psi (Water)
  • Minimum: 0 psi for these media
  • - Electrical: Voltage 120V AC
  • Wattage 6.1 W
  • Coil Insulation Class F
  • Electrical Connections via 1/2 in Conduit with 18 in Leads
  • Coil Enclosure Without Junction Box, Watertight
  • - Environmental Rating: Indoor/Outdoor
  • IP66
  • NEMA 4
  • brass body
  • Buna-N seals
  • - Includes Coil: Yes
  • Includes Seal: Yes
  • - Mounting Orientation: Horizontal or Vertical

Additional Information