AIMS Power 10000 Watt Pure Sine Inverter Charger 48VDC to 120/240VAC Split Phase PICOGLF10KW48V240VS PICOGLF10KW48V240VS

The aims 10000 watt 48vdc pure sine inverter charger was designed for commercial industrial and off grid uses where a 48vdc power supply is available and 120/240vac split phase power is needed. Capable of maintaining a 300 surge for up to 20 seconds this inverter now features an auxiliary output designed for large centrifugal pumps. The built in auto transfer switch can accept utility or generator power in order to run the built in smart battery charger. Equipped with an auto gen start feature this inverter is also able to turn on auto gen start compatible generators when the batteries reach low voltage. At 48vdc this inverter is also more efficient and will allow you to use smaller dc cables than comparable 12v or 24v systems. A 48vdc system is also beneficial for large solar arrays as it will minimize the number of solar charge controllers needed. Features ul style"margin-top0px; padding-top 5px; padding-bottom 5px;" 10000 watt low frequency inverter 110/220vac split phase 30000 watt surge for 20 seconds -3x surge capability battery priority selector terminal block marine coated and protected multi stage smart charger 80 amp remote panel available auto gen start 10msec typical transfer time optional 25w power save mode 8 battery charger settings inverter output specifications ul style"margin-top0px; padding-top 5px; padding-bottom 5px;" continuous output power 10000 watts surge rating 30000 watts (20 seconds) output waveform pure sine/same as input (bypass mode) 100-110-120vac / 220-230-240vac nominal efficiency 88 (peak) line mode efficiency 95 output frequency 50hz +/- 0.3hz / 60hz +/- 0.3hz typical transfer time 10ms (max) thd 10 dc input specifications ul style"margin-top0px; padding-top 5px; padding-bottom 5px;" nominal input voltage 48.0vdc low battery alarm 42.0vdc-44.0vdc low battery trip 40.0vdc-42.0vdc high voltage alarm 64.0vdc low

Additional Information