80/20® Cross Hinge Joint Set Steel Black HJ-24

The hj-24 is a metal connector set that creates a three-pipe intersection on two axes. This connector is the best option when you need to create separations without damaging the structural rigidity of some pipes. The hinge bracket ap-hinge allows the connector to be swivel. To create an hj-24 you need to regroup two h-24 together with two m6-25b bolts and two m6-n nuts using one ap-hinge. The hj-24 will be used mainly in the center of exterior sides. This connector will give you the option of making a pipe grid with fewer tubes than would be required with a wire mesh which is made with hj-7 connectors. This hj-24 will also be ideal when you need to create an intersection between two perpendicular pipes but you don't want to weaken the strength of a long tube or a series of long tubes. The joint also allows you to secure a stamp wheel easily at the bottom center of the structure. This connector is one of the easiest to connect along with the hj-1. The hj-24 is equipped with twelve striations for grip and six reinforcement holes for the construction of heavy-duty and structures and protection against frequent vibration. The hj-24 is compatible with most 28mm pipe systems and equivalent joints.

Additional Information