Pocket Surface Gage 10micron Probe MPN:2191800

These handheld or pocket-sized surface roughness testers, also known as surface testers, are built with an onboard probe and digital display. The entire unit can be placed directly on the surface of a feature or workpiece. The retractable probe extends from the body in multiple orientations. They have a simple digital display that can cycle through standard measurements such as Ra and Rz of a surface.

Technical Specifications

• Item Handheld Surface Roughness Tester
• IP Rating Not Rated
• SPC Output Yes
• Data Output Type Cable
• Display Functions Measured Results
• Drive Unit Principle Skid
• Maximum Operating Temperature - C 45 Degrees C
• Maximum Operating Temperature - F 112 Degrees F
• Measuring Condition Standards DIN ISO/JIS
• Measuring Range Ra: 6.35 micron m/250 micron in, Ry, Rmax, Rz: 25.3 micron m/999 micron in
• Measuring Range (In.) 6.35um/250u in
• Measuring Range (mm) 6.35 micron m
• Measuring Range Ra 6.35 micronm/250 micronin
• Measuring Range Rz 25.3 um/999 uin
• Memory Storage Capacity 1
• Minimum Operating Temperature - C 5 Degrees C
• Minimum Operating Temperature - F 41 Degrees F
• Number of Parameters Measured 3
• Operating Position Horizontal, Vertical, Upside Down
• Parameters Measured Ra, Rmax/Ry, Rz
• Probe Positions 90 degrees, 180 degrees, 270 degrees, Axial (Folded)
• Probe Sensor Type Piezoelectric
• Probe Tip Radius 5 um
• Profile Resolution 0.01micron m, 1micron in
• Sampling Length 0.030 in, 0.090 in, 0.150 in
• Tester Series Marsurf Pocket Surf Iv
• Analysis Graph No
• Case Type Carrying Case
• Compatible Data Output Cable Mfr. No. 4346020, Mfr. No. 4346023
• Construction Cast Aluminum
• Data Output Connection Type RS232C, USB
• Detector Measuring Force 15 mN
• Dimensions - Display Unit 140 mm x 76 mm x 6.35 mm
• Dimensions - Drive Unit 140 mm x 76 mm x 6.35 mm
• Features Durable Cast Aluminum Housing to Provide Years of Accurate and Reliable Measuring Operations, Review All Of The Parameters After the Measurement is Complete, Adjustable Measuring Length Based on 1, 3 or 5 Times The Cutoff Wavelength of 0.8mm/0.030", Operates in Any Position - Horizontal, Vertical, And Upside Down, Four Switchable Probe Positions - Axial or at An Angle of 90 Degrees, 180 Degrees Or 270 Degrees, Even Difficult to Reach Surfaces Such as Inside and Outside Diameters are Accessible, Marconnect Data Output For Easy Data Transfer That is Compatible with Standard Data Processing Systems, Easy To Read Lcd Presents The Measured Roughness Value In ?m Or ?inch Immediately After ScanningOut Of Range (High Or Low) And 'Low Battery' Signals Are Also DisplayedSimplified Calibration ProcessImproved Battery Life With 9V Battery That Is Easy To Replace
• For Use With Pocket Serf Probes
• Number of Sampling Spans 1, 2, 3, 4, 5
• Power Supply Battery
• Transverse Cutoff Length 0.8 mm, 0.03 mm

Manufacturer Details

• Manufacturer: Mahr
• Condensed Mfg Number: 2191800
• MPN: 2191800

Label Details

• Hazardous Material: N
• Green Material Flag: N
• Country of Origin: US
• CA Prop 65 Wht Label: N

Classification Details

• Harmonization Code: 9031808080
• GDS Category Name: Handheld and Portable Surface Roughness Testers
• GDS Family Name: Precision Measuring - Surface Property Testing
• GDS Segment Name: Machining
• UNSPSC: 41114508
• UNSPSC Class ID: 45
• UNSPSC Commodity Name: Mechanical instruments
• UNSPSC Commodity ID: 08
• UNSPSC Commodity Name: Surface testers
• UNSPSC Family ID: 11
• UNSPSC Family Name: Measuring and observing and testing instruments
• UNSPSC Segment ID: 41
• UNSPSC Segment Name: Laboratory and Measuring and Observing and Testing Equipment

Shipping Details

• Not For Sale In: HI AK PR