Audio-Technica AT-LP60XHP - Turntable - black, gunmetal - with Audio-Technica ATH-250AV headphones MPN:AT-LP60XHP-GM

The AT-LP60XHP turntable and headphones combination lets you enjoy your 33-1/3 and 45 RPM records with no additional equipment required. Based on the AT-LP60X fully automatic belt-drive turntable, the AT-LP60XHP adds an integrated headphone amplifier with a 3.5mm (1/8in) headphone jack and volume control on the front panel, so all you have to do is plug in the included ATH-250AV over-ear headphones (or other headphones of your choice) and start the records spinning. Of course, the turntable can also be connected to your stereo, powered speakers, computer or other components and used as a standard turntable. The detachable RCA output cable and built-in switchable phono preamp allow the turntable be connected to components with and without a dedicated phono input. The AT-LP60XHP features a redesigned tone arm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited. The ATH-250AV headphones are equipped with 40mm drivers for clear mid- and low-frequency reproduction. The lightweight construction and comfortable, isolating earpads allow you to listen for as long as you like. Integrated headphone amplifier with front-panel 3.5 mm (1/8in) headphone jack and volume control Integral Dual Magnet phono cartridge with replaceable diamond stylus (ATN3600L) Built-in switchable phono pre-amplifier for phono- or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain ATH-250AV over-ear headphones with 40 mm drivers, 3.5 m (11.5ft) cable and 3.5 mm (1/8in) stereo mini-plug Experience the high-fidelity audio of vinyl Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM Redesigned tonearm base and headshell for improved tracking and reduced resonance Anti-resonance, die-cast aluminum platter Includes: ATH-250AV headphones, detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

Features

Additional Information